Ordering & Installation
Cable Grommets for single cable penetrations
The Kick-In Floor Kit installs a Series 33 pathway into a 4 in. (102 mm) core drilled round opening. Built-in, self-locking fasteners securely wedge the pathway into the concrete. Installation is simple! Insert plate into opening. Insert pathway into plate and tighten set screws. Plate is locked in place! No fasteners and no sealant required.
RFG1
RFG2
Ordering Details
EZ-Path Series 33 Floor and Retrofit Plates
Series 33 pathways can be installed in floors as well as around existing cables
New Cable Installations Through Floors
The Kick-In Floor Kit installs a Series 33 pathway into a 4 in. (102 mm) core drilled round opening. Built-in, self-locking fasteners securely wedge the pathway into the concrete. Installation is simple! Insert plate into opening. Insert pathway into plate and tighten set screws. Plate is locked in place! No fasteners and no sealant required.
EZDP133FK
EZP133K
Ordering Details
Existing Cable Installations in Sleeves or Conduit
The Conduit Attachment Kit installs a Series 33 Pathway within a 4 in. (102 mm) sleeve or conduit. The split plate design allows for installation in both new and existing cabling applications.
EZDP133CAK
EZP133CA
Ordering Details
Existing Cables in Oversized Wall Openings
The Retrofit/Repair Wall Kit is a multi-purpose split mounting plate designed to facilitate EZ-Path® device installations around previously installed cables or in new or existing cabling applications where a large opening or opposing offset openings have been created in either gypsum board or masonry block walls. The assembled two-piece plates measuring 8 in. x 10 in. (203 mm x 254 mm) can be rotated in independently of each other in 90° increments to cover irregular or offset openings.
EZDP33WR
EZP133R