SpecSeal Cable Spray

SpecSeal Cable Spray

SpecSeal Cable Spray applies quickly to grouped cables within cable trays, providing protection against cable jacketing ignition from direct fire exposure and slowing flame propagation. Cable Spray applies quickly with an airless spray rig, only requiring a minimum 1/8" wet applied thickness. Once cured, Cable Spray forms a flexible, water and weather resistance seal adhering to virtually all cable jacketing materials.

Test Standards FM 3971
IEC 60332-3
IEEE 383
IEEE 1202

Third Party Approvals

Compare

Features

High solids, better coverage
Thixotropic for high-build application
Safe, no solvents, no asbestos, no PCB’s, no inorganic fibers
Non-halogenated
Low abrasion for longer pump life and less maintenance
Meets LEEDTM v3 requirements. Low emitting materials credit. See general LEED letter for additional applicable credits

Applications

Cables

Properties

Permanent

All Weather

Autobonding

Intumescent

Low VOC

Water Based

Water Resistant

Spray

Specifications

Property	Value
Color	White
Density/Weight per Gallon	10.7 lb/gal (1.28 kg/L)
Flame Spread	0*
Smoke Development	15*
Coverage	17.1 sq ft/gal @ 3⁄32" Wet Film Thickness (0.42 sq m/L @ 2.4 mm Wet Film Thickness)
Viscocity	105,000 cps
In Service Temperature	Less than 185°F (85°C)
Drying Time	Tack Free 2 Hours**
VOC Content	26 g/L***
Shelf Life From Date of Manufacture	24 months
Notes	Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks) Dependent on temperature and humidity **Per SCAQMD Rule 1168 (EPA Method 24)