Recently the UL STP (Standards Technical Panel) 1479 reviewed the UL 2079 test standard for...
A landmark publication came out in June 2019, when ASTM published ASTM E3157, “Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems”. This new Standard Guide is chock full of good information that will help construction project stakeholders avoid many common firestopping errors.
The stated purpose of the industry task group in developing ASTM E3157 was to create a compendium of general information and strategies to ensure better firestopping and help mitigate problems. Of note is the concept of coordinating between the contractors that make the holes in fire-rated construction and the contractors who must seal them up to ensure they are properly firestopped.
Some of the concepts covered in the Standard Guide include the following:
- The important nature of pre-construction meetings to coordinate between those who will make the openings and those that will ultimately be required to seal them.
- The essentials of planning penetrations up front, including adequate spacing in assemblies constructed using frangible materials such as gypsum board.
- Proper surface preparation techniques to ensure good adhesion and material performance.
- The effects of “movement-during-cure” and how to mitigate the deleterious impact that can happen when penetrants move and sealants are not fully cured.
- Avoiding complicated arrangements of running piping through walls or floors, including attempting to pass through at 90 degree angles vs. angled penetrations.
- Warning to not mix products from different manufacturers in the same openings.
- Use of proper bond breakers, and suggestions on what to avoid to prevent failures.
- The importance of sealant tooling and placement.
- Shrinkage of firestop materials and how different materials may ultimately dry or cure.
While the Standard Guide is in no way completely exhaustive, it does reinforce the idea that firestop contractors and firestop inspectors play extremely important roles on construction projects where it states, “Many times the experience of the firestop contractor and firestop industry inspector can help identify and avoid potential issues associated with the installation of the firestop systems.” By using this Standard Guide, construction project stakeholders can vastly improve the firestopping process and ensure that public safety is served. We encourage our readers to purchase a copy of ASTM E3157 by visiting the following link: https://www.astm.org/Standards/E3157.htm.